Understanding Asko Error Codes

Code F10: The dishwasher is overfilling with water.

Possible Causes:

• Faulty water inlet valve.
• Problem with the float switch.
• Blockage in the pressure chamber.

Code F11: The dishwasher is having trouble draining the water.

Possible Causes:

• Clogged drain hose.
• Obstruction in the air gap (if installed).
• Issue with the drain pump.

Code F12: The dishwasher is having trouble filling with water.

Possible Causes:

• Water supply valve is turned off.
• Kinked or blocked water inlet hose.
• Faulty water inlet valve.

Code F52: The dishwasher cannot detect the correct water level.

Possible Causes:

• Malfunctioning water level sensor.
• Problem with the float switch.
• Siphoning of water from the dishwasher.

Code F54: The dishwasher is overfilling with water.

Possible Causes:

• Stuck or faulty water inlet valve.
• Malfunctioning pressure switch.
• Issue with the control board.

Code F56: The circulation pump, responsible for spraying water, is not working properly.

Possible Causes:

• Obstruction in the circulation pump.
• Faulty circulation pump motor.
• Problem with the control board.

Expert Advice: Repair or Replace?

Deciding whether to repair or replace your Asko dishwasher depends on several factors. Age is a key consideration. If your dishwasher is nearing the end of its expected lifespan (typically 10-12 years), replacing it might be more cost-effective in the long run. However, for newer models, repair is usually the best option.

The cost of the repair is another important factor. If the repair cost exceeds 50% of the price of a new dishwasher, replacement might be a better choice. The type of problem also plays a role. Some issues, like minor leaks or faulty door latches, are relatively inexpensive to fix. However, major component failures, like a broken motor or control board, can be more costly.

Frequently Asked Questions

Q: My Asko dishwasher is displaying error code F10. What does this mean?

A: Error code F10 indicates that your dishwasher is overfilling with water. This could be caused by a faulty water inlet valve, a problem with the float switch, or a blockage in the pressure chamber. For your safety, unplug the appliance and shut off any gas supply before checking these components. If you are uncertain, call Volt & Vector for assistance.

Q: My Asko dishwasher is showing error code F11. What should I do?

A: Error code F11 means the dishwasher is having trouble draining. This is often caused by a clogged drain hose, an obstruction in the air gap (if installed), or an issue with the drain pump. You can carefully check the drain hose for kinks or blockages. If the issue persists, contact Volt & Vector for professional service.

Q: Why is my Asko dishwasher leaking?

A: Leaks can stem from various sources, including a faulty door seal, a damaged water inlet valve, or a clogged drain hose. For your safety, unplug the appliance before investigating the source of the leak. It's best to contact a qualified technician for accurate diagnosis and repair.

Q: Why is my Asko dishwasher so noisy?

A: Unusual noises can be caused by worn-out bearings, a malfunctioning pump motor, or debris trapped in the spray arms. For your safety, unplug the appliance and shut off any gas supply before checking the interior of the dishwasher. If you can’t isolate the noise, it's best to consult with a qualified technician.