Heating Repair in NYC

Heating Repair in NYC (Forced-Air Furnaces Only)

Volt & Vector provides on-site diagnostics and repair for residential forced-air heating systems in NYC. This page is for repair work only (no installs, no replacements).

Quick facts

  • Service: diagnostics and repair for residential forced-air furnaces
  • Hours: Monday–Saturday, 9:00 AM–6:00 PM
  • Diagnostic fee: $99 (credited toward the repair if you approve the work on the same job)
  • Warranty: 180-day parts and labor warranty on completed repairs
  • Service area: Brooklyn, Manhattan below 96th Street, selected Queens ZIPs
  • Building paperwork: COI available on request

What we service

  • Forced-air furnaces (residential)
  • Common furnace control types (standard thermostat, basic multi-stage, typical safety circuits)

Common heating problems we fix

  • No heat (blower may run but air is cold)
  • Furnace will not start (no response to a heat call)
  • Short cycling (starts then shuts off repeatedly)
  • Ignition failures (attempts to start, then locks out)
  • Intermittent heat (works sometimes, fails at other times)
  • Airflow-related shutdowns (overheat behavior, limit trips)
  • Thermostat and control issues (not calling for heat, misconfiguration, wiring faults that do not require wall opening)

Not offered (so you do not waste time booking)

  • New system installation or system replacement
  • Boiler or steam systems
  • Ductwork projects (design, replacement, balancing)
  • Commercial HVAC
  • Fuel conversions or gas piping work beyond appliance-level connection requirements

Before you start (homeowner-safe checks, no tools, no disassembly)

  • Thermostat settings
    • Confirm mode is set to HEAT (not COOL or OFF)
    • Raise the setpoint at least 3–5°F above room temperature
    • If battery powered, replace batteries and retest
  • Power basics
    • Check the circuit breaker is not tripped
    • Confirm the furnace service switch is ON (often near the unit)
  • Airflow basics
    • Replace the furnace filter if it is visibly clogged
    • Make sure supply vents and returns are not blocked
  • If you smell gas or suspect a carbon monoxide issue
    • Leave the apartment, ventilate if safe to do so, and contact your utility or emergency services

Step-by-step: what happens on a diagnostic visit

  1. You share the symptoms (what you hear/see, when it fails, thermostat type, any error lights/codes visible without opening panels).
  2. We verify the heat call and observe the start sequence and shutdown behavior.
  3. We isolate the fault path (control logic, ignition sequence behavior, airflow/overheat behavior, thermostat/control signal issues).
  4. We give a clear repair plan and an estimate before performing billable repairs.
  5. If the fix requires internal testing, specialty tools, or parts, we proceed only after approval.

Scheduling and arrival windows

  • Typical arrival windows
    • 9:00 AM–11:00 AM
    • 11:00 AM–1:00 PM
    • 1:00 PM–3:00 PM
    • 3:00 PM–5:00 PM
  • Same-day or next-day availability depends on schedule and parts constraints

Service area (NYC)

  • Brooklyn
    • Williamsburg
    • Greenpoint
    • Brooklyn Heights
    • Cobble Hill
    • Carroll Gardens
    • Boerum Hill
    • Clinton Hill
    • Fort Greene
    • Prospect Heights
    • Park Slope
    • South Slope
    • Gowanus
    • DUMBO
    • Red Hook
    • Downtown Brooklyn
  • Manhattan (below 96th Street)
    • Downtown Manhattan
    • Midtown Manhattan
    • Upper West Side (below 96th)
    • Upper East Side (below 96th)
  • Queens (selected areas)
    • Long Island City
    • Astoria
    • Sunnyside
    • Maspeth
    • Ridgewood
    • Middle Village
    • Rego Park
    • Forest Hills
    • Fresh Meadows
    • Whitestone
    • Flushing
    • College Point

What to send when booking (so the visit stays efficient)

  • Address and apartment access notes (doorman, lockbox, parking constraints)
  • Best callback number
  • Thermostat brand/model (photo is fine)
  • Furnace make/model (photo of the rating label if accessible without removing panels)
  • Exact symptoms and timing
  • Any visible error indicators (photo/video from the outside only)
  • COI requirements if your building needs one

FAQ

Do you work on boilers or steam heat?

  • No. This service is for forced-air furnaces only.

Is the $99 diagnostic credited?

  • Yes. The $99 diagnostic is credited toward the repair if you approve the work on the same job.

Do you provide a COI for building management?

  • Yes. Request it when booking and include the building’s COI instructions.

Can you quote a repair price before the visit?

  • Not reliably for “no heat.” The diagnostic visit is used to confirm the failure point and provide an accurate repair plan and estimate.

What if the repair requires internal electrical testing or panel access?

  • That is technician-only work. If diagnosis moves beyond homeowner-safe checks, we handle it on-site as part of the professional diagnostic process.

Contact

Need help from our experts?

+1 (332) 333-1709

9:00 AM - 6:00 PM

Our service manager handles all calls personally. For short questions, text works best.

Google Business Profile

See live reviews, photos, and recent jobs. Booked with us? Please leave a review, thank you!

180-Days Warranty

Every completed repair includes a 180-day parts & labor warranty. OEM parts only. Warranty service is prioritized.

Local Service

Built by real NYC technicians - not marketers.

Volt & Vector is where clean design meets certified service.

Map highlighting various neighborhoods in New York City and nearby areas in teal.

Appliance repair

other

Book your service

Choose a convenient time slot. Diagnostic $99 (credited toward repair).

The diagnostic fee credit applies to the same job when you approve the repair. You will receive diagnostic results and an estimate before any repair begins.

Speak directly with a Volt & Vector dispatcher

voltnvector@gmail.com

Send your appliance details and preferred time window

Available Mon–Sat, 9 AM–6 PM.
Same-day slots often open.
Close-up of damaged rubber seal on the door of a stainless steel refrigerator in a kitchen.Stainless steel gas stove with six burners and double oven doors in a kitchen with wooden cabinets and granite countertops.Black and gold vintage-style gas stove with multiple burners and double oven doors in a modern kitchen.Hand holding an orange infrared thermometer pointed at a stainless steel gas stove with control knobs and a blue pot on a burner.Modern kitchen countertop with stainless steel toaster oven, gas stove with six burners, cutting board, knife block, and condiments.Stainless steel refrigerator with glass door in a modern kitchen with wood-paneled walls and a coffee maker on the counter.

Need help from our experts?

+1 (332) 333-1709

9:00 AM - 6:00 PM

Our service manager handles all calls personally. For short questions, text works best.

Google Business Profile

See live reviews, photos, and recent jobs. Booked with us? Please leave a review, thank you!

180-Days Warranty

Every completed repair includes a 180-day parts & labor warranty. OEM parts only. Warranty service is prioritized.

Local Service

Built by real NYC technicians - not marketers.

Volt & Vector is where clean design meets certified service.

Map highlighting various neighborhoods in New York City and nearby areas in teal.

Brands

Need help from our experts?

+1 (332) 333-1709

9:00 AM - 6:00 PM

Our service manager handles all calls personally. For short questions, text works best.

Google Business Profile

See live reviews, photos, and recent jobs. Booked with us? Please leave a review, thank you!

180-Days Warranty

Every completed repair includes a 180-day parts & labor warranty. OEM parts only. Warranty service is prioritized.

Local Service

Built by real NYC technicians - not marketers.

Volt & Vector is where clean design meets certified service.

Map highlighting various neighborhoods in New York City and nearby areas in teal.
Check service availability
Enter a 5-digit NYC ZIP to see if you’re in coverage.

1. Schedule your visit

2. On-site diagnostic

3. Approve & repair

4. Done & covered

COI (Certificate of Insurance)

Available on request - usually not required in Brooklyn, but often asked for in Manhattan buildings and co-ops. Please remember that certain issues can come from incorrect use or installation, not from parts failure - our technicians will always point that out and show how to prevent it in the future.

Warranty & Compliance

Every repair is covered by a 180-day warranty on both parts and labor. If the appliance is older, keep in mind that some surrounding components can wear out over time — sometimes one repair leads to another part showing its age. We always explain options clearly before doing extra work.

Safety & Courtesy Protocol

We treat every visit like we’re guests in your home. Technicians wear shoe covers or remove footwear when entering, and we always clean up after the job. If you notice a little dust or debris left behind - our apologies - each tech handles 3-5 appointments per day and works to stay on schedule. If your window was 11-1, the technician usually arrives closer to 11; if running late, we’ll text you right away. Our goal is simple: work clean, stay safe, and respect your space and time.

Coverage

We cover Brooklyn—Downtown, Brooklyn Heights, Park Slope, Williamsburg, Greenpoint, Bed-Stuy, Carroll Gardens, Prospect Heights, and Flatbush—and Manhattan (below 96th Street)-FiDi, Battery Park, Tribeca, SoHo, Chelsea, Midtown, UES, UWS, Gramercy, and the Village. You’ll receive a text alert ~30 minutes before arrival.

Why Volt & Vector

We’ve spent years working inside large NYC repair companies - seeing how real technicians get buried under rushed schedules, fake “same-day” promises, and endless call-center noise. Volt & Vector grew out of that frustration. We wanted a place where diagnostics still matter, where techs can take time to do the job right and talk to people directly. We’re not calling ourselves perfect - far from it - but we’re building the kind of service we always wanted to work for: respectful, transparent, and run by people who actually fix things.

Pricing & Diagnostic Policy

Our diagnostic visit is always billed at the first appointment - that’s the starting point for every repair. After the visit, the technician sends full details to our service desk. Sometimes the tech can give a price range on-site, but we’re moving away from instant quotes - parts pricing changes like crypto these days, and we’d rather stay accurate than promise the wrong number.

Simple issues - like a clogged drain, loose wire, or minor reset - can often be fixed on the spot starting from $99. If a full repair with parts is needed, total cost varies by brand and model - just like in any NYC company, it can start around $320 and go up depending on parts and labor. We believe in clarity over surprises. You’ll always see the diagnostic results and estimate before any repair begins.

Pricing reference

Diagnostic visit

$99

Billed at the first appointment. Includes on site inspection and testing, basic access and disassembly when needed for diagnosis, and documented findings. Credited toward any approved repair for the same job.

Minor fixes completed during the first visit

Varies

Every repair is covered by a 180-day warranty on both parts and labor. If the appliance is older, keep in mind that some surrounding components can wear out over time — sometimes one repair leads to another part showing its age. We always explain options clearly before doing extra work.

Repairs requiring parts and labor

Varies

Total cost varies by brand and model and depends on the required parts and labor. Repairs with parts often start around $320 and go up depending on parts and labor.

Modern kitchen cooktop with an orange and red kettle on a burner, with a white brick wall and staircase in the background.Person wearing a yellow glove opening a stainless steel oven with red control knobs and striped kitchen towels hanging on the handle.Technician repairing a built-in refrigerator with the door open in a kitchen.Person holding an infrared thermometer aimed at a stainless steel stove with various pots and pans on the burners.Person wearing red work gloves lifting cardboard box indoorsHands wearing red Milwaukee work gloves adjusting metallic equipment

The diagnostic fee credit applies to the same job when you approve the repair. You will receive diagnostic results and an estimate before any repair begins.

Diagnostic Process

Step 1: Diagnostic visit

We perform on site testing to identify the cause of the issue, confirm what parts are needed if any, and document findings.

Step 2: Written estimate

After diagnostics, you receive the estimate based on the confirmed fault and the parts and labor required. No repair is performed without approval.

Step 3: Repair and credit

If you approve the repair, the $99 diagnostic fee is credited toward the final invoice for the same job.

Examples of the $99 credit

A: Minor issue corrected during the first visit

Diagnostic visit: $99. Repair approved and completed same visit. Total can start from $99 plus any parts if needed.

B: Repair requiring parts

Diagnostic visit: $99. If the approved repair total is $450, you pay $99 for diagnosis and $351 after the diagnostic credit is applied.

What affects the final cost:

Confirmed failure and required parts

Total cost depends on the exact failure identified during testing and the parts required to complete the repair.

Brand, model, and platform complexity

Built in platforms, integrated units, and advanced control systems typically require more access and testing.d

Access and installation constraints

Tight cabinetry, stacked laundry, and built in installations can change labor time and may require additional disassembly for safe access.

Multiple faults and intermittent issues

Diagnostic visit: $99. Repair approved and completed same visit. Total can start from $99 plus any parts if needed.

Warranty

Completed repairs include a 180 day parts and labor warranty. OEM parts only. Warranty service is prioritized.

Contact

+1 (332) 333 1709

Book online or call for scheduling. For short questions, text works best.

About Us & How it works

Transparent process, clear policies, and NYC building-ready service.

1–4: How it works
1
Schedule your visit
2
On-site diagnostic
3
Approve & repair
4
Done & covered
COI (Certificate of Insurance)

Available on request - usually not required in Brooklyn, but often asked for in Manhattan buildings and co-ops. Please remember that certain issues can come from incorrect use or installation, not from parts failure - our technicians will always point that out and show how to prevent it in the future.

Warranty & Compliance

Every repair is covered by a 180-day warranty on both parts and labor. If the appliance is older, keep in mind that some surrounding components can wear out over time — sometimes one repair leads to another part showing its age. We always explain options clearly before doing extra work.

Safety & Courtesy Protocol

We treat every visit like we’re guests in your home. Technicians wear shoe covers or remove footwear when entering, and we always clean up after the job. If you notice a little dust or debris left behind - our apologies - each tech handles 3-5 appointments per day and works to stay on schedule. If your window was 11-1, the technician usually arrives closer to 11; if running late, we’ll text you right away. Our goal is simple: work clean, stay safe, and respect your space and time.

Coverage
  • Brooklyn: Prospect Heights, Clinton Hill, Boerum Hill, Park Slope, Carroll Gardens, Cobble Hill, Kensington, Bushwick (West), Greenwood Heights, Prospect Lefferts Gardens, Windsor Terrace, Bedford–Stuyvesant, Crown Heights, Fort Greene, Brooklyn Heights, DUMBO, Greenpoint
  • Queens: Middle Village, Rego Park, Forest Hills, Fresh Meadows, Whitestone, North/Broadway Flushing, College Point
  • Manhattan: Below 96th Street (ZIP-based coverage)
  • You’ll receive a text alert ~30 minutes before arrival.
Why Volt & Vector

We’ve spent years working inside large NYC repair companies - seeing how real technicians get buried under rushed schedules, fake “same-day” promises, and endless call-center noise. Volt & Vector grew out of that frustration. We wanted a place where diagnostics still matter, where techs can take time to do the job right and talk to people directly. We’re not calling ourselves perfect - far from it - but we’re building the kind of service we always wanted to work for: respectful, transparent, and run by people who actually fix things.

Pricing & Diagnostic Policy

Our diagnostic visit is always billed at the first appointment - that’s the starting point for every repair. After the visit, the technician sends full details to our service desk. Sometimes the tech can give a price range on-site, but we’re moving away from instant quotes - parts pricing changes like crypto these days, and we’d rather stay accurate than promise the wrong number.

Simple issues - like a clogged drain, loose wire, or minor reset - can often be fixed on the spot starting from $99. If a full repair with parts is needed, total cost varies by brand and model - just like in any NYC company, it can start around $320 and go up depending on parts and labor. We believe in clarity over surprises. You’ll always see the diagnostic results and estimate before any repair begins.

Frequently Asked Questions

Clear answers about scheduling, diagnostics, coverage, warranty, parts, and what to expect on-site in NYC.

General & Company
What are your hours of operation?
We operate Monday–Saturday, 9:00 AM–6:00 PM. Visits are scheduled by arrival window, and you’ll typically receive a text about 30 minutes before arrival.
How do I book an appointment?
Book online or contact us with your ZIP code and appliance details.
  • Phone: +1 (332) 333-1709
  • Email: voltnvector@gmail.com
  • Faster booking: send model/serial + a photo of any error code.
What service areas do you cover?
We cover residential NYC service calls in Brooklyn, Manhattan below 96th St, and selected Queens ZIP codes. If you’re unsure, send your ZIP and building type (walk-up vs elevator).
What arrival windows do you offer?
We schedule by arrival window (not an exact minute). Typical windows: 9–11, 11–1, 1–3, 3–5. You’ll usually get a heads-up text before we arrive.
Are you insured, and can you provide a COI?
Yes—we’re insured and can provide a COI for building management when requested. If your building requires specific wording (additional insured, address, certificate holder), tell us before the visit.
What training and background do your technicians have?
We hire for real diagnostics skill, not “parts swapping.” Our team includes technicians with U.S. technical education (including university technical programs), and some have completed HVAC/refrigeration coursework through U.S. training programs (including California-based programs). On-site, we follow service-manual test procedures and match the right tech to the job.
Where can I see reviews and recent work?
Our Google Business Profile is the best place for live reviews and recent activity. If you want brand-specific experience, share your model number and we’ll confirm whether we service that platform.
Services & Specialization
Which appliances do you repair?
We repair major residential appliances. Common calls include refrigerators/freezers (including built-ins), dishwashers, washers, dryers, ovens, ranges, cooktops, and ventilation where applicable.
Which brands do you service?
We service many premium brands commonly installed in NYC. Examples include Sub-Zero, Wolf, Miele, Thermador, Bosch, Gaggenau, ILVE, and others. Coverage can vary by product line—send the model number to confirm.
Do you service built-in refrigeration and high-end appliances?
Yes—built-ins and high-end platforms are a common NYC call type. For tight cabinetry or panels, we plan access and testing steps before committing to parts.
Do you handle refrigeration and “sealed-system” issues?
We can diagnose cooling problems and confirm the failure class before recommending a path. If the diagnosis points to sealed-system work, we’ll confirm the correct scope and compliance requirements for that specific job before proceeding.
Do you repair gas appliances?
Yes, for applicable residential platforms. We verify safe ignition behavior, flame quality, and shutoff access. If there’s any active gas odor, do not operate the appliance—ventilate and follow your utility’s emergency guidance.
Do you offer preventative maintenance?
Yes—maintenance prevents repeat failures and performance issues. Common items include condenser/airflow cleaning, drain and leak checks, defrost/drain maintenance, calibration checks, and performance verification.
Do you install appliances, or only repair?
We’re primarily a repair service. If an installation correction or modification is required to complete a repair safely (clearances, airflow, leveling, drain routing), we’ll explain what’s needed and what we can support.
Pricing & Payment
How do you price repairs?
We start with diagnostics, then quote the repair based on confirmed parts and labor scope. No repair begins without approval.
What is your diagnostic fee?
$99 diagnostic fee. It covers on-site testing and a documented finding for the most likely cause class and next steps.
Is the diagnostic fee credited toward the repair?
Yes—the $99 diagnostic is credited toward the approved repair total.
Do you provide estimates in writing before starting work?
Yes—findings and the estimate come before repair work. The only exception is a minor on-the-spot fix that you explicitly approve in real time.
Do you charge any additional fees?
We keep pricing transparent and will disclose any pass-through costs before work. Examples can include required building parking/garage fees or special access requirements.
What payment methods do you accept?
We accept standard modern payment methods (card and electronic options). If your building requires a specific payment workflow, mention it during booking.
Warranty & Parts
What warranty do you provide on repairs?
180-day warranty on parts and labor for completed repairs. Warranty applies to the repaired failure and documented scope.
Do you use OEM (genuine) parts?
Yes—OEM parts only when applicable and available. We prioritize correct fit, reliability, and predictable performance.
Can I supply my own parts?
Sometimes, but we need to confirm compatibility first. Customer-supplied parts can change the warranty scope because we can’t verify sourcing, storage, or revision compatibility without inspection.
Will you need to order parts, and how long does that take?
Some repairs require parts—lead times depend on brand and stock status. Many common OEM parts arrive in a few business days; specialty items can take longer during backorders.
Will an independent repair affect my manufacturer warranty?
It depends on the brand and warranty type. Some manufacturer warranties require an authorized provider. If your unit is under factory warranty, tell us up front and we’ll advise what should go through the manufacturer versus what can be addressed independently.
Preparation & Process
What should I check before calling a technician?
Do a few quick, safe checks first—then call with what you found.
  • Power: breaker not tripped, outlet working, unit plugged in.
  • Settings: setpoints/modes not changed accidentally.
  • Water (dishwashers/ice makers): valve on, no kinked line, no visible leak.
  • Airflow: obvious vent or filter blockage where applicable.
  • Error code/message: take a photo of the display.
How should I prepare my home for the service visit?
Clear access and have the key info ready. Move fragile items, clear the area around the appliance, and (if possible) locate the model/serial tag. If your building requires a COI or service elevator reservation, tell us ahead of time.
What information helps you diagnose faster?
Model/serial + a symptom description + photos.
  • Model and serial (photo of the tag is best).
  • Photo of any error code/message.
  • Short symptom: “leaking from left front,” “not cooling,” “won’t drain,” etc.
  • Install notes: built-in/tight cabinetry, stacked units, recent remodel, panel fridge, etc.
How long does diagnostics or repair usually take?
Diagnostics typically take 30–90 minutes depending on access and appliance type. Some repairs can be completed the same visit if the scope is confirmed and parts are available; others require a follow-up once parts arrive.
Will you need to move the appliance or remove panels?
Sometimes—NYC installations often require controlled access steps. We’ll explain what needs to come out (toe-kick, panels, drawer, range pull-out) and how we protect floors/cabinets before moving anything.
Post-Service
What follow-up support do you provide after a repair?
You get a clear record of what was diagnosed, what was repaired, and what was tested. If we see install/use factors contributing to the failure (airflow restriction, drainage, loading, filter maintenance), we’ll show you what to change to prevent repeats.
What if the same problem happens again after the repair?
If it’s related to the completed repair and within the 180-day warranty window, warranty service is prioritized. Contact us with the symptom and any new error code so we can triage quickly.
Safety & Environment
Do you follow safety and clean-work procedures in my home?
Yes—work is done clean and controlled. We protect surrounding surfaces, communicate before any testing that affects the home, and use safe shutoff practices when required. Old parts are removed and handled responsibly; if a job involves regulated materials, handling follows the appropriate compliant procedure for that scope.

Need help from our experts?

+1 (332) 333-1709

9:00 AM - 6:00 PM

Our service manager handles all calls personally. For short questions, text works best.

Google Business Profile

See live reviews, photos, and recent jobs. Booked with us? Please leave a review, thank you!

180-Days Warranty

Every completed repair includes a 180-day parts & labor warranty. OEM parts only. Warranty service is prioritized.

Local Service

Built by real NYC technicians - not marketers.

Volt & Vector is where clean design meets certified service.

Check service availability
Enter a 5-digit NYC ZIP to see if you’re in coverage.

Appliance Repair in NYC | Volt & Vector

See the full catalog of our services—organized by ZIP — right here.

Need help from our experts?

+1 (332) 333-1709

9:00 AM - 6:00 PM

Our service manager handles all calls personally. For short questions, text works best.

Google Business Profile

See live reviews, photos, and recent jobs. Booked with us? Please leave a review, thank you!

180-Days Warranty

Every completed repair includes a 180-day parts & labor warranty. OEM parts only. Warranty service is prioritized.

Local Service

Built by real NYC technicians - not marketers.

Volt & Vector is where clean design meets certified service.

Map highlighting various neighborhoods in New York City and nearby areas in teal.

Google Reviews

Bright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white background

My wife and I were having trouble with our Miele dryer and thought for sure we were in for a several hundred-dollar repair. I called Volt & Vector because they had such good reviews online. It was a Saturday and I was told someone could come out that day. We had a holiday gathering and so couldn’t do that, but they offered to come out first thing Monday morning. And so that’s what happened. Vlad appeared on time and promptly took responsibility for diagnosing the problem. It turned out that our three cats (which Vlad immediately befriended) had shed so much hair over the previous fifteen years that they’d clogged the drain of our condensing dryer. Vlad cleaned it out, charged us $99 dollars and it was only after he left that we felt ashamed we hadn’t tipped him more. The dryer was fine, he didn’t recommend replacing anything; he just solved the problem, humbly and honestly. We have several appliances that surely will develop problems in the future. As we told him when he left, he and his company are who we will be calling in the future. We can’t recommend Vlad and his company more strongly. (The three culprits are in the photo)

Bright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white background

Great people to deal with. Called and set up appointment right away. Mark came and fixed the issue right away. Very friendly and respectful. Will use again. Thanks guys.

Bright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white background

Vlad has been an incredible asset. In the few months we've known him, he's already fixed a dryer, two washing machines, and an oven! He's always very upfront with the repairs needed and the associated costs with fixing an appliance. I wouldn't hesitate at all to hire him for any future appliances in need of repair

Bright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white background

I split my time between Italy and NYC and manage several Airbnb units. Scheduling used to take too much energy around guest check-ins and turnovers. With Volt & Vector Appliance Repair, the routine became predictable: clear 2-hour windows (9–11am or 12–2pm), a text with ETA, written pricing (diagnostic credited), before/after photos, and a short summary after each visit. Over ~30 repairs in two years: washers, dryers, dishwashers, ranges, a refrigerator seal. They’ve kept me informed and moved quickly on parts (usually 24–48 hours when ordered). Access and lockboxes are handled without drama, work areas are left clean, and my reviews stayed steady. Hosting from abroad is easier when maintenance is this consistent. Strong recommend for Brooklyn and Manhattan hosts.

Larry Lawson
Bright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white background

Amazing service every time! I work for a multi-use property in lower Manhattan and we have used Volt & Vector for at least 20+ jobs and I can honestly say they do incredible and reliable work. Vlad is a pleasure to work with, he is honest and his pricing is fair. Highly recommend!

Bright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white backgroundBright yellow five-pointed star on a white background

Excellent experience with Vlad! He came day of to help fix a laundry machine issue. He was on time, a clear communicator about the issue and fixed it with ease. He came back the following day (at no charge!) when I reached out with further information about how the machine was working to confirm everything was working properly/as intended. Excellent service and will absolutely be working with them again when we have future needs. Can’t recommend enough!